12 Simple Steps to Setup your Digital Fotofob in 10 minutes

Step 1:
Step 1: Unpack the Digital Fotofob and use the small screwdriver provided to open the battery door. Install the batteries following the detailed instructions in the main Operation Manual (enclosed). Replace the battery door and press and hold the 'Mode' key for 3 seconds to turn on the Digital Fotofob. The Digital Fotofob will display the clock. The default is '00:00:00 2006/01/01 Sunday'. The clock time will automatically be synchronized to your computer clock upon USB connection.

Step 2:
Press 'Mode' key again to get to Main Menu in which four modes of operation (Power Off, Clock/Calendar, Setup, Exit) are ready for your selection. Use '' and '' keys to move cursor to Setup and press 'Mode' key to confirm selection.

Step 3:
When entering Setup mode, you will see the Auto Slide Interval selection with default at 5 seconds. Use '' and '' keys to adjust the value to your preference (between Disable and 1 to 31 seconds) and push 'Mode' key to confirm as well as to leave this selection. You will then see the Auto Off Timer screen. Auto Off Timer setting default is 5 minutes. Use '' and '' keys to adjust the value to your preference (between Disable and 1 to 31 minutes) and push 'Mode' key to confirm as well as to leave this selection. Auto Off Timer value sets the countdown time for the Digital Fotofob to automatically switch itself off from the last key input.